產品認證
ISM 2.4 GHz Operating Frequency
Fully Compliant 2.4 G IEEE802.15.4/ZigBee Specifi cations
Wireless Transmission Range up to 700 m (PA-Version)
Wireless Transmission Range up to 100 m (T-Version)
GUI Configuration Software (Windows Version)
4 AI, 2 AO, 2 DI and 2 DO
Individual Channel Confi guration
Overvoltage Protection is up to 240 Vrms
Surge and ESD Protection
DIN-Rail Mountable
Fully Compliant 2.4 G IEEE802.15.4/ZigBee Specifi cations
Wireless Transmission Range up to 700 m (PA-Version)
Wireless Transmission Range up to 100 m (T-Version)
GUI Configuration Software (Windows Version)
4 AI, 2 AO, 2 DI and 2 DO
Individual Channel Confi guration
Overvoltage Protection is up to 240 Vrms
Surge and ESD Protection
DIN-Rail Mountable
Analog Input | Input Channel：4 Differential Input Type：+/-10 V, +/-5 V, +/-1 V, +/-500 mV, +/-150 mV, -20 mA ~ +20 mA (Requires Optional External 125 Ω Resistor) Resolution：16-bit Sampling Rate：10 Samples/Second (Total) Accuracy：+/-0.1% of FSR -3dB Bandwidth：15.7 Hz Zero Drift：+/-20 μV/°C Span Drift：+/-25 ppm/°C Common Mode Rejection：86 dB Normal Mode Rejection：100 dB Input Impedance：>2 MΩ Overvoltage Protection：240 Vrms Individual Channels Confi gurable：Yes |
Analog Output | Output Channels：2 Output Type：+/-10 VDC, +/-5 VDC, 0 ~ 10 VDC, 0 ~ 5 VDC Resolution：12-bit Accuracy：+/-0.1% of FSR Zero Drift：+/-30 μV/°C Span Drift：+/-25 ppm/°C Programmable Output Slope：0.0625 ~ 512 V/Second Voltage Capability：20 mA @ 10 V Power-on and Safe Value：Yes |
Digital Input | Input Channels：2 (Sink) On Voltage Level：3.5 VDC ~ 50 VDC Off Voltage Level：1 VDC max. Input Impedance：10 KΩ Event Counters Channels : 2 Max. Counts: 16-bit (65535) Max. Input Frequency : 50 Hz Min. Pulse Width : 10 ms |
Digital Output | Output Channels：2 (Sink) Output Type：Isolated Open Collector Max. Load Current：700 mA/channel Load Voltage：+5 VDC ~ +50 VDC Short Circuit Protection：Yes |
可選型號 | ||
| 產品編號 | 描述 |
| ZT-2060 CR | Wireless 6-channel Isolated Digital Input and 4-channel Relay Output Module (RoHS) |
Important Note: ZigBee Data Acquisition modules need a ZigBee host converter to coordinate the data transmission route. Please remember to order a ZT-2550 or ZT-2570 ZigBee host converter when you purchase ZigBee Data Acquisition Products. | ||
可選附件 | ||
| 產品編號 | 描述 |
| MDR-20-24 | 24 VDC/1.0 A, 24 W 電源帶導軌安裝 |
| ZT-2510 CR | ZigBee 中繼器 (RoHS) |
| ZB-2510P CR | High Power Amplifier ZigBee Repeater (RoHS) |
| ZB-2010-PA CR | High Power Amplifier ZigBee Repeater (RoHS) |
| ZT-2550 CR | RS-485/RS-232轉ZigBee 轉換器 (主站) |
| ZB-2550P CR | RS-485/RS-232 to High Power Amplifier ZigBee Converter (Host) (RoHS) |
| ZB-2550-PA CR | RS-485/RS-232 to High Power Amplifier ZigBee Converter (Host) (RoHS) |
| ZT-2570 CR | Ethernet/RS-485/RS-232轉ZigBee 轉換器 (主站) (RoHS) |
| ZB-2570P CR | Ethernet/RS-485/RS-232 to High Power Amplifier ZigBee Converter (Host) (RoHS) |
| ZB-2570-PA CR | Ethernet/RS-485/RS-232 to High Power Amplifier ZigBee Converter (Host) (RoHS) |